Note: You are viewing this page without the associated stylesheet. You may want to update your browser for optimal viewing performance. If you continue you may want to skip to the page contents.

Bright Ideas - Insights from the AnswerPerson

View all blog entries »

Flash on Blow Molded Part

A customer called and asked if using a torch to de-flash a Santoprene blow molded part would damage it. Hard grades (above 87A) can be flame polished with a torch. Soft grades contain a high concentration of rubber and typically do not flame polish very well.

Posted on 2008-06-04 4:50 PM

Answerperson The AnswerPersonSM
Technical solutions, right away. Exclusively from ExxonMobil Chemical's Santoprene brand TPVs.

more >>